State ComparisonUpdated

Indiana vs Ohio Electrical Code

Ohio has stricter electrical code enforcement, scoring 55/100 (Permissive) compared to Indiana's 47/100 (Permissive). Indiana enforces NEC 2017 while Ohio uses NEC 2023.
Indiana47/100
Ohio55/100

Side-by-side comparison

FactorIndianaOhio
NEC editionNEC 2017NEC 2023
WireRef score (our summary, not official)47/100 (Permissive)55/100 (Permissive)
Electrician licenseLocal onlyContractors only
License nameElectrical Contractor LicenseElectrical License (varies by jurisdiction)
Permits requiredYesYes
State amendmentsYesNo
Homeowner exemptYesYes

Key differences

Licensing requirements

Indiana

Indiana does not require a statewide electrician license. Requirements are set by local jurisdictions.

Ohio

Ohio does not require a statewide electrician license. Requirements are set by local jurisdictions.

Wire sizing is identical. NEC Table 310.16 ampacity values have not changed since NEC 2017. Whether you are wiring in Indiana or Ohio, a 20A circuit uses 12 AWG copper and a 30A circuit uses 10 AWG copper. The differences between states are in code enforcement, not in the wire sizing itself.

GFCI requirement differences

Because Ohio uses NEC 2023 and Indiana uses NEC 2017, GFCI coverage differs in these rooms:

LocationOhio (NEC 2023)Indiana (NEC 2017)
KitchenAll kitchen receptaclesCountertop receptacles, plus any within 6 ft of the sink
BasementAll basement receptaclesUnfinished basements only
Bathroom, garage, outdoorAll receptacles in both editions

Frequently asked questions

Which state has stricter electrical codes, Indiana or Ohio?

Ohio has stricter enforcement with a score of 55/100 vs 47/100. The score reflects NEC edition recency, licensing requirements, permit enforcement, and state amendments.

Is my electrician license from Indiana valid in Ohio?

Electrician licenses are generally not transferable between states. If you hold a license in Indiana, you will typically need to apply separately in Ohio. Some states offer reciprocity agreements, but these vary. Contact the licensing authority in Ohio directly for requirements.

Is the wire size different in Indiana vs Ohio?

No. Wire sizing per NEC Table 310.16 is identical regardless of which NEC edition a state enforces. A 20A circuit requires 12 AWG copper in both Indiana and Ohio. The ampacity values have not changed since NEC 2017.

Do both Indiana and Ohio require electrical permits?

Both states require electrical permits for most work. Common permit-required projects in both states include new circuits, panel upgrades, service changes, and EV charger installations.

Does the NEC edition difference between Indiana and Ohio matter for my project?

For most residential work (circuits, outlets, fixtures), the NEC edition difference has minimal practical impact because wire sizing tables are unchanged. The biggest difference is GFCI coverage: NEC 2023 requires GFCI in all kitchen outlets and finished basements, while older editions are narrower. If you are doing a kitchen or basement remodel, the edition difference matters.

Requirements vary by state. NEC edition, licensing, permits, and GFCI rules differ by jurisdiction. Check your state or pick it below for personalized info across WireRef.
Important: For reference only. Not a substitute for a licensed electrician. Electrical work can cause serious injury, death, fire, or property damage if performed incorrectly. Always hire a licensed electrician for electrical work, especially for service upgrades, panel work, and 240V circuits. Values are derived from NFPA 70 (NEC) for educational purposes. Always verify against your locally adopted NEC edition and amendments - local jurisdictions may enforce stricter requirements. WireRef provides reference information only and is not responsible for work performed based on this content. NEC® is a registered trademark of the National Fire Protection Association. Free NEC access via NFPA · OSHA Electrical Safety · Terms of use.

NEC 2023 references verified February 2026 · Report a mistake