New Mexico vs Texas Electrical Code
Side-by-side comparison
| Factor | New Mexico | Texas |
|---|---|---|
| NEC edition | NEC 2020 | NEC 2023 |
| Compliance score | 67/100 (Permissive) | 80/100 (Moderate) |
| Electrician license | Required | Required |
| License name | Electrical Contractor License | Master/Journeyman Electrician License |
| Permits required | Yes | Yes |
| State amendments | No | No |
| Homeowner exempt | Yes | Yes |
Key differences
- Texas uses a more recent NEC edition (2023 vs 2020), meaning it has the latest safety requirements including expanded GFCI coverage and updated load calculation methods.
Licensing requirements
New Mexico
New Mexico requires a Electrical Contractor License through the New Mexico Regulation and Licensing Department. Homeowners are exempt for work on their own primary residence.
Texas
Texas requires a Master/Journeyman Electrician License through the Texas Department of Licensing and Regulation (TDLR). Homeowners are exempt for work on their own primary residence.
Wire sizing is identical. NEC Table 310.16 ampacity values have not changed since NEC 2017. Whether you are wiring in New Mexico or Texas, a 20A circuit uses 12 AWG copper and a 30A circuit uses 10 AWG copper. The differences between states are in code enforcement, not in the wire sizing itself.
GFCI requirement differences
Because Texas uses NEC 2023 and New Mexico uses NEC 2020, there are differences in GFCI coverage:
| Location | Texas (NEC 2023) | New Mexico (NEC 2020) |
|---|---|---|
| Kitchen | All receptacles including refrigerator | Countertop within 6 ft of sink only |
| Basement | All areas (finished and unfinished) | Unfinished areas only |
| Laundry | All laundry receptacles | Within 6 ft of sink |
| Bathroom | All receptacles (same in both) | |
| Outdoor | All receptacles (same in both) | |
| Garage | All receptacles (same in both) | |
Frequently asked questions
Which state has stricter electrical codes, New Mexico or Texas?
Texas has stricter enforcement with a score of 80/100 vs 67/100. The score reflects NEC edition recency, licensing requirements, permit enforcement, and state amendments.
Is my electrician license from New Mexico valid in Texas?
Electrician licenses are generally not transferable between states. If you hold a license in New Mexico, you will typically need to apply separately in Texas. Some states offer reciprocity agreements, but these vary. Contact the licensing authority in Texas directly for requirements.
Is the wire size different in New Mexico vs Texas?
No. Wire sizing per NEC Table 310.16 is identical regardless of which NEC edition a state enforces. A 20A circuit requires 12 AWG copper in both New Mexico and Texas. The ampacity values have not changed since NEC 2017.
Do both New Mexico and Texas require electrical permits?
Both states require electrical permits for most work. Common permit-required projects in both states include new circuits, panel upgrades, service changes, and EV charger installations.
Does the NEC edition difference between New Mexico and Texas matter for my project?
For most residential work (circuits, outlets, fixtures), the NEC edition difference has minimal practical impact because wire sizing tables are unchanged. The biggest difference is GFCI coverage: NEC 2023 requires GFCI in all kitchen outlets and finished basements, while older editions are narrower. If you are doing a kitchen or basement remodel, the edition difference matters.
NEC 2023 references verified April 2026