Indiana vs Michigan Electrical Code
Side-by-side comparison
| Factor | Indiana | Michigan |
|---|---|---|
| NEC edition | NEC 2017 | NEC 2023 |
| Compliance score | 72/100 (Moderate) | 95/100 (Strict) |
| Electrician license | Required | Required |
| License name | Electrical Contractor License | Electrical Contractor License |
| Permits required | Yes | Yes |
| State amendments | Yes | Yes |
| Homeowner exempt | Yes | Yes |
Key differences
- Michigan uses a more recent NEC edition (2023 vs 2017), meaning it has the latest safety requirements including expanded GFCI coverage and updated load calculation methods.
Licensing requirements
Indiana
Indiana requires a Electrical Contractor License through the Indiana Fire Prevention and Building Safety Commission. Homeowners are exempt for work on their own primary residence.
Michigan
Michigan requires a Electrical Contractor License through the Michigan Bureau of Construction Codes. Homeowners are exempt for work on their own primary residence.
Wire sizing is identical. NEC Table 310.16 ampacity values have not changed since NEC 2017. Whether you are wiring in Indiana or Michigan, a 20A circuit uses 12 AWG copper and a 30A circuit uses 10 AWG copper. The differences between states are in code enforcement, not in the wire sizing itself.
GFCI requirement differences
Because Michigan uses NEC 2023 and Indiana uses NEC 2017, there are differences in GFCI coverage:
| Location | Michigan (NEC 2023) | Indiana (NEC 2017) |
|---|---|---|
| Kitchen | All receptacles including refrigerator | Countertop within 6 ft of sink only |
| Basement | All areas (finished and unfinished) | Unfinished areas only |
| Laundry | All laundry receptacles | Within 6 ft of sink |
| Bathroom | All receptacles (same in both) | |
| Outdoor | All receptacles (same in both) | |
| Garage | All receptacles (same in both) | |
Frequently asked questions
Which state has stricter electrical codes, Indiana or Michigan?
Michigan has stricter enforcement with a score of 95/100 vs 72/100. The score reflects NEC edition recency, licensing requirements, permit enforcement, and state amendments.
Is my electrician license from Indiana valid in Michigan?
Electrician licenses are generally not transferable between states. If you hold a license in Indiana, you will typically need to apply separately in Michigan. Some states offer reciprocity agreements, but these vary. Contact the licensing authority in Michigan directly for requirements.
Is the wire size different in Indiana vs Michigan?
No. Wire sizing per NEC Table 310.16 is identical regardless of which NEC edition a state enforces. A 20A circuit requires 12 AWG copper in both Indiana and Michigan. The ampacity values have not changed since NEC 2017.
Do both Indiana and Michigan require electrical permits?
Both states require electrical permits for most work. Common permit-required projects in both states include new circuits, panel upgrades, service changes, and EV charger installations.
Does the NEC edition difference between Indiana and Michigan matter for my project?
For most residential work (circuits, outlets, fixtures), the NEC edition difference has minimal practical impact because wire sizing tables are unchanged. The biggest difference is GFCI coverage: NEC 2023 requires GFCI in all kitchen outlets and finished basements, while older editions are narrower. If you are doing a kitchen or basement remodel, the edition difference matters.
NEC 2023 references verified April 2026