Florida vs Georgia Electrical Code
Side-by-side comparison
| Factor | Florida | Georgia |
|---|---|---|
| NEC edition | NEC 2020 | NEC 2023 |
| Compliance score | 82/100 (Moderate) | 80/100 (Moderate) |
| Electrician license | Required | Required |
| License name | Certified/Registered Electrical Contractor | Electrical Contractor License |
| Permits required | Yes | Yes |
| State amendments | Yes | No |
| Homeowner exempt | Yes | Yes |
Key differences
- Georgia uses a more recent NEC edition (2023 vs 2020), meaning it has the latest safety requirements including expanded GFCI coverage and updated load calculation methods.
- Florida has state-specific amendments to the NEC, indicating active code review and oversight.
Licensing requirements
Florida
Florida requires a Certified/Registered Electrical Contractor through the Florida DBPR / Electrical Contractors Licensing Board. Homeowners are exempt for work on their own primary residence.
Georgia
Georgia requires a Electrical Contractor License through the Georgia Construction Industry Licensing Board. Homeowners are exempt for work on their own primary residence.
Wire sizing is identical. NEC Table 310.16 ampacity values have not changed since NEC 2017. Whether you are wiring in Florida or Georgia, a 20A circuit uses 12 AWG copper and a 30A circuit uses 10 AWG copper. The differences between states are in code enforcement, not in the wire sizing itself.
GFCI requirement differences
Because Georgia uses NEC 2023 and Florida uses NEC 2020, there are differences in GFCI coverage:
| Location | Georgia (NEC 2023) | Florida (NEC 2020) |
|---|---|---|
| Kitchen | All receptacles including refrigerator | Countertop within 6 ft of sink only |
| Basement | All areas (finished and unfinished) | Unfinished areas only |
| Laundry | All laundry receptacles | Within 6 ft of sink |
| Bathroom | All receptacles (same in both) | |
| Outdoor | All receptacles (same in both) | |
| Garage | All receptacles (same in both) | |
Frequently asked questions
Which state has stricter electrical codes, Florida or Georgia?
Florida has stricter enforcement with a score of 82/100 vs 80/100. The score reflects NEC edition recency, licensing requirements, permit enforcement, and state amendments.
Is my electrician license from Florida valid in Georgia?
Electrician licenses are generally not transferable between states. If you hold a license in Florida, you will typically need to apply separately in Georgia. Some states offer reciprocity agreements, but these vary. Contact the licensing authority in Georgia directly for requirements.
Is the wire size different in Florida vs Georgia?
No. Wire sizing per NEC Table 310.16 is identical regardless of which NEC edition a state enforces. A 20A circuit requires 12 AWG copper in both Florida and Georgia. The ampacity values have not changed since NEC 2017.
Do both Florida and Georgia require electrical permits?
Both states require electrical permits for most work. Common permit-required projects in both states include new circuits, panel upgrades, service changes, and EV charger installations.
Does the NEC edition difference between Florida and Georgia matter for my project?
For most residential work (circuits, outlets, fixtures), the NEC edition difference has minimal practical impact because wire sizing tables are unchanged. The biggest difference is GFCI coverage: NEC 2023 requires GFCI in all kitchen outlets and finished basements, while older editions are narrower. If you are doing a kitchen or basement remodel, the edition difference matters.
NEC 2023 references verified April 2026